ePowerSwitch 4 IEC is a logical development of ePowerSwitch 4. With its 1U in height and 4 IEC320 sockets on the front panel, it is ideal for server racks and patch panels. The device provides quick and direct access.
ePowerSwitch 4 IEC offers many possibilities of use for the control, administration and monitoring of any device. Flexible and comfortable configuration is possible via the integrated web server. The area of use is mainly in server cabinets and patch panels. Thanks to the front panel network switches, any server or computer can be integrated into the monitoring at any time.
Each power outlet can be turned on, off and restarted via IP or an RS232 interface. This can be done via a web interface, a KVM switch, SNMP or any serial interface. They can be driven individually or as an individually created group. Switching on or off sequentially avoids charging peaks.
The power outlets are equipped with extremely robust HiAmp relays. For switching, individual delays can be configured (1-255 seconds for restart, 1-3600 seconds for restarting).
The connected devices are monitored using Ping or Scan by IP commands. During a crash, a message by trap SNMP, mail and Syslog is sent automatically. Monitored devices can be restarted using defined rules.
Flexible and cost-effective solutions are possible with the ePowerSwitch 4 IEC for energy management of servers and other equipment. Commissioning and configuration of connected equipment is done in a few minutes. The areas of use are not limited to the IT environment.
Configuration and management of the outlets are done through the web server of the equipment using a web browser. AC outlets can also be controlled through a KVM switch or an RS232 terminal console.
All devices use a single-use encrypted value and a hash function so that usernames and passwords can not be rebuilt. Some models also offer fully encrypted communication (eg ePowerSwitch 8XM or VizioGuard).
The web interface allows the administrator to create up to 40 user accounts with different rights. Access to the web server is protected by names and passwords that are 32 characters long. In addition, up to 40 users can access the ePowerSwitch and all xBus peripheral devices connected to it at the same time.
Grouping of the sector plugs
The grouping of power outlets makes it possible to turn on or turn off a server with redundant mains power, or several devices with a command via a browser or SNMP.
Up to 32 rules can be configured to control analog and digital inputs. In the event of an alert, different preprogrammed actions may be triggered, e.g. order power outlets and relay outputs, or send emails, SNMP traps and syslog messages.
Timer and scheduler
Thanks to the timer and scheduler functions, it is possible to control individual outlets or groups of outlets at regular intervals or at a specified day and time. These features also allow you to automatically send emails, SNMP traps and syslog messages. With an internet connection, you can also trigger actions on remote ePowerSwitch devices.
A 32-character name can be freely assigned to all connected devices and sensors as well as to the device itself. This unique identification facilitates the programming of rules, groups and associated actions.
An intuitive interface and context-sensitive online help allow administrators to quickly configure the many features of these systems. Detailed instructions and explanations can be found in the user manual.
Power input: 1 (SCHUKO, FR, UK, CH)
Rated voltage: 230V / 50Hz
Max. current: 10A
Output: 4 IEC320 power outlets
Rated voltage: 230V / 50Hz
Max. current / output: 10A
Network standards: IEEE 802.3, 10/100 Mbit / s
Network Protocols: TCP / IP, HTTP
Network connection: RJ45 for UTP CAT5
Max. Network cable length: 100 meters
Terminal connection: RS232, SUB-D 9 female
Connection bus: RS485, RJ45
LED: power supply, network, plug
Operating temperature: 0 ° C to + 40 ° C
Operating humidity: 10% to 80%
Dimensions: (W x H x D) 478 x 49 x 73mm
Certifications: CE, EN55022, EN55024, RoHS
Warranty: 2 years of repair / replacement.