VDS-2700 - Video and data over coaxial

New product

Quotation

VDS 2700 - video transmission system
RS485 data, audio, alarm signals
DC power supply via coaxial cable
Transmission distance up to 600 meters
PTZ function, excellent picture quality
Designed for video surveillance.

More details

VDS 2700 is the system for transmitting video, RS485 data, audio, alarm signals and DC power via a coaxial cable. This system ensures the quality of the transmission signal over a long or short distance. The distance can reach 600m when sending a DC power supply to the camera. Its duplex RS485 transmission channel is applied to the P / T / Z (pan / tilt / zoom) function of the PTZ dome camera. In addition to transmitting alarm and audio signals, the VDS 2700 also transmits DC power to the fast dome camera.

VDS 2700 consists of two parts. One is the remote unit, 2700-RU is connected to a fast dome camera (also called sender). The other is the local unit, 2700-L is connected to monitor with the monitoring system (also called
Viewer). Using interoperator technology, the VDS 2700 provides the innovative transmission method, fast installation with excellent image quality for a CCTV system.

Specifications
This system transmits all signals and DC power via a single coaxial cable
Connected with a 12V DC CCD or 24V AC CCD camera
Camera For PTZ CCD Camera (Speed ​​Dome)
Half-duplex channel for the RS485 interface port
Supports RS485 data range from 9.6 Kbps to 19.2 Kbps
The transmission distance can reach 600 m
Continuous camera feed via coaxial cable) and at 1200 m (with splitter)
Real-time analog video signals support NTSC / PAL Color and B / W 50fps and 60fps
No signal lost, No Hum in Video
Protection against connection errors and out-of-service warnings
Integrated electrical transients and lightning protection
Compact, robust and reliable device

Characteristics
Model: VDS-2700R (the remote unit - R)
Video transmission: 600m max
Transmitter
 transmission 1 video source + 1 audio
Alarm
12V power supply
RS 485 commands
Video input signal: 1.0Vpp, 75
Bandwidth of the video signal: 6 MHz
Audio input signal: 3.0Vpp, 100K, Max.
Alarm input signal: N.C./N.O./Terminal 1000
Output power: DC12V, 1.2A, Max.
RS485 data rate: 9.6 Kb at 19.2 Kbps
Connection: (PTB = Pluggable Terminal Block)
Video input: BNC socket
Audio input: BNC socket
DC and alarm: PTB 4-pin, pitch 3.5 mm
RS485 port: 3-pin PTB, 3.5 mm pitch
Link output: BNC socket
Dimension: 100.0mm (W) x 75.0mm (W) x 26.75mm (H)
Net weight: 235g

Characteristics
Model: VDS-2700L (Local Unit - L)
Receiver
Separation of the 1 video source
alarms
Camera power supply
RS 485 commands
Video output signal: 1.0Vpp, 75
Bandwidth of the video signal: 5.2MHz
S / N ratio of the video signal: 50dB
Gain of the audio output: 0dB 3dB, 600
Bandwidth of the audio signal: 50Hz to 10KHz
S / N ratio of the audio signal: 46dB
RS485 data rate: 9.6 Kb at 19.2 Kbps
Alarm output: N.C./N.O., Rated contact 1A, 30VDC
DC power input: 40V 2V
Max. DC output power: 38V, 1.6A, Min.
Link Fault Output: 0.15 A, Min.
Connection: (PTB = Pluggable Terminal Block)
Link In: ​​BNC Socket
Link Fault: 3-pin PTB, 3.5 mm pitch
DC power input: 2 pin PTB, 5.0 mm pitch
Video output: BNC socket
Audio output: BNC jack
Alarm output: 3 pin PTB, 3.5 mm pitch
RS485 port: 3-pin PTB, 3.5 mm pitch (set of 2)
Dimension: 100.0mm (W) x 75.0mm (W) x 26.75mm (H)
Net weight: 210g

4 other products in the same category