FV4K-DCK-1x Dual Camera Full 4K Encoder
New product
• H.265/H.264 Dual Camera Video Streaming
• Interfaces with HDMI, LVDS, and Composite cameras
• Programmable to support a variety of cameras
• High Quality Low Latency Encoding Pass Camera Control Commands over IP
• ONVIF Profile S & T Compliant
The FV4K-DCK-1x designed for dual camera inspection, surveillance, industrial and UAV applications. The flexibility of the system allows for a visible camera and an infrared or night vision camera. The hardware consists of a 3-board set: Input, Encoder and Connector PCB. The system is capable of encoding multiple channels of H.265 and H.264 video in 4K resolutions. The Input board features flexible digital and analog input ports. The encoder can be configured to stream over IP and simultaneously record to USB or micro SD card. This compact design only uses 4.5 watts of power when streaming from 2 cameras. The FV4K-DCK-1x is available with either software preloaded or with an optional SDK starter kit.
Technical Interfaces
•Visible Camera Formats Sony FCB-ER8550 , Micro HDMI
•HD and SD IR Formats RS170, NTSC/PAL
•Recording To either USB, or Micro SD
•Additional Interfaces GigE, Audio Input, RS-485, Micro-HDMI Output, Composite
Output
Video Codecs H.265, H.264
Encoding Resolutions 4Kp30, 1080p (up to 60fps), 720p, NTSC/PAL, VGA, CIF
and QVGA
Output Formats RTP, RTSP, MPEG-2 TS and RTMP1
Features
• Low Latency, Low Power
• Ability to Resize HD Camera Input to Lower
Resolutions Keeping Full Field of View
• SRT Modes Supported: Caller, Sender, Rendezvous & SRT
Encryption
• Pass Camera Control Commands over IP
• Easy-to-Use HTTP-Based Control Interface
• ONVIF® Profile S & T
• Compatible with ZEUS® Video Decoders1
Specifications
Encoder Board Size 58 x 58 x 38 mm (2.28 x 2.28 x 1.49 in)
Encoder Board Weight 104g (aluminum heat pipe is additional 40g)
Power Consumption 4.5W typical while encoding 2 cameras in H.265 video at
1080p60
Power Supply 12V DC
Operating Temperature -5°C to +70°C
FV4K-DCK-RPS
OEM Starter Kit
• FV4K-DCK-1x Encoder Boards
• Power Supply
• Software SDK
• Documentation
• Serial Cable
• KEL Cable
12 other products in the same category
IP9500VRS HD IP encoder for FCB-EV9500M...
The IP9500VRS network access control panel board is suitable for SONY FCB-EV9500M HD MIPI block camera module, connecting the camera through an extremely thin coaxial cable, and can output HD video signals throught the network without camera configuration. With AI intelligent function, can realize face capture, licence plate capture, human form...
Mini WiFi Video Routers 802.11n MST-WF11NM,...
Wifi mini video routerWireless video transfer Wifi to "ipad, iphone, Android tablet, Android phone, pc".Wireless LAN Mode 2T2RUse with UCD-210 802.11n wifi.
LVDS Mini Coding Module HD Video Full HD LVDS
The ATOMAS-MINI-LVDS Encoding Module is a feature-rich video encoder designed for a wide range of OEM camera models.Unique compact form factor of the ATOMAS Mini LVDS.
MINI-YUV Full HD Codeur Vidéo IP pour caméra OEM
The MINI-YUV coding module is an original video encoder for a wide range of OEM camera models. The unique compact form factor of ATOMAS-MINI-YUV is particularly suitable for integration with most parallel camera modules.
MINI-DUAL - Dual Full HD IP Video Camera
The ATOMAS-MINI-DUAL Encoder Module is a feature-rich video encoder designed for a wide range of dual camera designs. The ATOMAS-MINI-DUAL's compact dual-input format is particularly suitable for integration into two-phase systems.cameras with an LVDS master zoom block and a secondary video source (digital or analog).
MICRO-HDSDI - Full HD IP Video Module HD-SDI
The MICRO-HDSDI module is a vidéo interface add-on designed for use with the ATOMAS-MICRO coding platform. This optional module converts any HD-SDI video input into a parallel video interface compatible with the ATOMAS-MICRO encoder.
Atomas-MICRO NCTC Full HD vidéo IP
The ATOMAS-MICRO-CNCT coding module is a feature-rich IP video coder designed for a wide range of OEM camera models. The unique miniaturized form factor of ATOMAS-MICRO-CNCT makes it particularly suitable for integration into small HD camera systems.
USB9500VRS USB 3.0 capture module
USB 3.0 capture module for SONY FCB EV EC CV zoom color camera blocks Suitable for SONY FCB EV/CV/EH/CH series of HD zoom camera blocks.Work with most digital zoom camera blocks that have the same interface as SONYFCB series cameras.Connect the zoom camera blocks through the LVDS interface to automaticallyidentify the camera’s HD video format.Support...
ACE-HEN0142-iL
LVDS to IP Encoder Module1080p 30(25)fpsH.264 High ProfilesEthernet 10/100 Base-T LANDC12V/PoE(IEEE802.3af)
